The Optoma TX779 DLP projector is exceptionally bright at 4500 lumens to provide outstanding video and data display in large rooms and in rooms with high ambient light. Remotely monitor, manage and control the Optoma TX779 over the network via the integrated RJ45 Crestron RoomView® user-friendly interface. The environment-friendly TX779 has energy saving features including <1 watt standby mode, saving you money in the long run.
* 3D content can be viewed with active LCD shutter glasses when the projector is connected to a computer with a compatible 3D graphics card. Please visit www.optoma.com for more information.
Bright at 4500 ANSI lumens with high contrast ratio of 3000:1 (full on/off)
Crestron RoomView® for projector management and control via RJ45 connection
Presentation-friendly IR remote with USB mouse function and laser pointer
Environment-friendly design – consumes <1 watt on standby mode
Built-in closed captioning
Display Technology
Single 0.7” DMD DLP Technology by Texas Instruments
Native Resolution
XGA (1024 x 768)
Maximum Resolution
HD (1920 x 1080)
Brightness (Typical)
4500 ANSI Lumens
Contrast Ratio
3000:1 (Full On/Full Off)
Lamp Life and Type
3000/2000 Hours (STD/Bright) 280W P-VIP
Throw Ratio
1.8 to 2.1:1 (Distance/Width)
Projection Distance
3.28’ to 32.8’ (1.0 to 10m)
Image Size (Diagonal)
23.4” to 300” (0.59 to 7.62m)
Offset
112%
Displayable Colors
1.07 Billion
Uniformity
80%
Audio
3-Watt Speaker
Noise Level (STD/BRIGHT)
28dB/30dB
Remote Control
IR Remote Mouse with Laser Pointer
Computer Compatibility
HD, UXGA, WXGA, SXGA+, SXGA, XGA, SVGA, VGA Resized, VESA, PC and Macintosh Compatible
AC Power Cord, VGA to VGA Cable, Remote Control, Batteries for Remote, Carrying Case, Lens Cap, Multilingual CD-ROM User’s Manual, Quick Start Card and Warranty Card
Optional Accessories
HDMI Cable, Ceiling Mount, VGA to Component Cable, S-Video Cable, Composite Video Cable, RS-232 Cable and Panoview™ Series Screens
Warranty
3 Years Optoma Express Repacement Service, 1 Year on Lamp
* Lamp life is dependent upon many factors, including lamp mode, display mode, usage, environmental conditions and more. Lamp brightness can decrease over time.
Using the inherent speed of DLP technology, select Optoma projectors can output video and images at an astonishing rate of 120Hz allowing you to view colorful stereoscopic 3D full screen image.
The 3D effect is generated by splitting the 120Hz signal into two standard video streams, one for each eye. Using DLP® Link™ technology, the 3D active shutter glasses synchronize with the on-screen image to filter each stream to the left and right eye. Your brain then combines the two streams to provide a three dimensional image. Optoma 3D enabled projectors can be used with compatible 3D PC based content. Examples of 3D content includes educational software, video games and design/modeling programs.
Optoma projectors cannot be used to display 3D TV broadcasts or 3D Blu-ray discs. Optoma projectors may support these applications in the future but will require additional hardware at extra cost.
*3D source, 3D content and active LCD shutter glasses are required
